Jordi Labs excels in analytical testing according to globally-recognized specifications. We can help you complete essential materials studies focused on physical properties testing, particle size analysis, gel content, and more. Our experienced team of Ph.D. chemists has a suite of advanced techniques at their fingertips, enabling fully-comprehensive interrogations of materials under study. We can subsequently provide precise, routine testing according to specific standards, such as ASTM D, ASTM E, and ASTM F regulations.
ASTM International standards are designated with a specific prefix which denotes the broad scope of the standard. For instance:
- ASTM D refers to miscellaneous materials
- ASTM E refers to miscellaneous subjects
- ASTM F refers to materials for pre-defined applications
At Jordi Labs, we perform testing to hundreds of different ASTM regulations that typically fall under these three designations. We are adept in selecting manual methods of particle size analysis for soil sediments according to ASTM D422 – 63. Our chemists can determine the thermal stability of your sample via thermogravimetry according to ASTM E2550 – 17. These are a mere selection of the standards that we can adhere to as part of our advanced analytical testing service.
Contact a member of the Jordi Labs team today to learn how we can help you meet stringent specifications. To see a full range of the ASTM regulatory standards that we can comply with, browse the table below:
| Standard | Category | Description |
|---|---|---|
| ASTM 1120 | ASTM | Standard Test Method for Boiling Point of Engine Coolants |
| ASTM 2214-02 | ASTM | Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| ASTM 2605 | ASTM | Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection |
| ASTM 3148 | ASTM | Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression |
| ASTM 3418 | ASTM | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ASTM B923 | ASTM | Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
| ASTM C1749 | ASTM | Standar Guide for Measurment of the Rheological Properties of Hyraulic Cementious Paste Using a Rotational Rheometer |
| ASTM C25-31 | ASTM | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
| ASTM C518 | ASTM | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM D 217-02 | ASTM | Standard Test Methods for Cone Penetration of Lubricating Grease |
| ASTM D 301 | ASTM | Standard Test Methods for Soluble Cellulose Nitrate |
| ASTM D1003 | ASTM | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D1004 | ASTM | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D1042 | ASTM | Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
| ASTM D1078 | ASTM | Standard Test Method for Distillation Range of Volatile Organic Liquids |
| ASTM D1125 | ASTM | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D1149 | ASTM | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D117 | ASTM | Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids |
| ASTM D1177 | ASTM | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D1209 | ASTM | Standard Test Method for Color of Clear Liquids |
| ASTM D1238 | ASTM | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ASTM D1269 | ASTM | Method of Test for Lead Antiknock Compounds in Gasoline |
| ASTM D1287 | ASTM | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D1298 | ASTM | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D1335 | ASTM | Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings |
| ASTM D1403 | ASTM | Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
| ASTM D1434 | ASTM | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D1439 | ASTM | Standard Test Methods for Sodium Carboxymethylcellulose |
| ASTM D1475 | ASTM | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D149 | ASTM | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM D150 | ASTM | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM D1525 | ASTM | Standard Test Method for Vicat Softening Temperature of Plastics |
| ASTM D153 | ASTM | Standard Test Methods for Specific Gravity of Pigments |
| ASTM D1599 | ASTM | Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D1613 | ASTM | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D1652 | ASTM | Standard Test Method for Epoxy Content of Epoxy Resins |
| ASTM D1708 | ASTM | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
| ASTM D1709 | ASTM | Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
| ASTM D1722 | ASTM | Standard Test Method for Water Miscibility of Water-Soluble Solvents |
| ASTM D1762 | ASTM | Standard Test Method for Chemical Analysis of Wood Charcoal |
| ASTM D1876 | ASTM | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
| ASTM D1894 | ASTM | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D1907 | ASTM | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D1922 | ASTM | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
| ASTM D2007 | ASTM | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D2116 | ASTM | Standard Specification for FEP Resin Molding and Extrusion Materials |
| ASTM D2122 | ASTM | Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D2137 | ASTM | Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D222 | ASTM | Standards and Specifications for Nonmetallic Minerals and Their Products |
| ASTM D2222 | ASTM | Standard Test Method for Methanol Extract of Vinyl Chloride Resins |
| ASTM D2236 | ASTM | Standard Method Of Test For Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum |
| ASTM D2240 | ASTM | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D2256 | ASTM | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D2393 | ASTM | Test Method for Viscosity of Epoxy Resins and Related Components *Withdrawn, No Replacement |
| ASTM D2425 | ASTM | Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry |
| ASTM D2515 | ASTM | Standard Specification for Kinematic Glass Viscometers |
| ASTM D256 | ASTM | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM D257 | ASTM | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D2709 | ASTM | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| ASTM D2765 | ASTM | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ASTM D2839 | ASTM | Use of a Melt Index Strand for Determining Density of Polyethylene |
| ASTM D2857 | ASTM | Standard Practice for Dilute Solution Viscosity of Polymers |
| ASTM D2887 | ASTM | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography |
| ASTM D2896 | ASTM | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D2902 | ASTM | Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D1002 | ASTM | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D3218-07 | ASTM | Standard Specification for Polyolefin Monofilaments |
| ASTM D3278 | ASTM | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D3418 | ASTM | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ASTM D3616-95 | ASTM | Standard Test Method for Rubber -- Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
| ASTM D374-99 | ASTM | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D3763 | ASTM | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM D3828 | ASTM | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester |
| ASTM D3835 | ASTM | Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
| ASTM D3849 | ASTM | Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy |
| ASTM D3895 | ASTM | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
| ASTM D3985 | ASTM | Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |
| ASTM D4017-02 | ASTM | Standard Test Method for Water in Paints and Paint Materals by Karl Fischer Method |
| ASTM D4052 | ASTM | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D4065 | ASTM | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
| ASTM D412 | ASTM | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D4176 | ASTM | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D422 | ASTM | Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods) |
| ASTM D4274 | ASTM | Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
| ASTM D4441 | ASTM | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
| ASTM D445 | ASTM | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D4488 | ASTM | Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls |
| ASTM D4603 | ASTM | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
| ASTM D4662 | ASTM | Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
| ASTM D471 | ASTM | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D473-07 | ASTM | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D482 | ASTM | Standard Test Method for Ash from Petroleum Products |
| ASTM D4883 | ASTM | Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
| ASTM D4980 | ASTM | Standard Test Methods for Screening of pH in Waste |
| ASTM D5035 | ASTM | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D5155 | ASTM | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
| ASTM D5225 | ASTM | Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer |
| ASTM D5227 | ASTM | Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
| ASTM D5292 | ASTM | Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM D5296 | ASTM | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
| ASTM D5386 | ASTM | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D5470 | ASTM | Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials |
| ASTM D5492-10 | ASTM | Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
| ASTM D5511 | ASTM | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D5527 | ASTM | Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
| ASTM D5594 | ASTM | Standard Test Method for Determination og the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM D56 | ASTM | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D5630 | ASTM | Standard Test Method for Ash Content in Plastics |
| ASTM D570 | ASTM | Standard Test Method for Water Absorption of Plastics |
| ASTM D5736 | ASTM | Standard Test Method for Thickness of Highloft Nonwoven Fabrics (Withdrawn 2008) |
| ASTM D5739 | ASTM | Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry |
| ASTM D575 | ASTM | Standard Test Methods for Rubber Properties in Compression |
| ASTM D5845 | ASTM | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
| ASTM D5868 | ASTM | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D5946 | ASTM | Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| ASTM D6110 | ASTM | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
| ASTM D6130 | ASTM | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D624 | ASTM | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D6271-04 | ASTM | Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol |
| ASTM D6304 | ASTM | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D6370-99 | ASTM | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D638 | ASTM | Standard Test Method for Tensile Properties of Plastics |
| ASTM D6417 | ASTM | Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D6474-12 | ASTM | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
| ASTM D648 | ASTM | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D6556-10 | ASTM | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D6730 | ASTM | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
| ASTM D6845 -12 | ASTM | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D6869 | ASTM | Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) |
| ASTM D695 | ASTM | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D7028 | ASTM | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
| ASTM D7169 | ASTM | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D7252 | ASTM | Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
| ASTM D7253-06 | ASTM | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
| ASTM D7271-06 | ASTM | Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer |
| ASTM D7334 | ASTM | Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement |
| ASTM D7359 | ASTM | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM D7371 | ASTM | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) |
| ASTM D7394-18 | ASTM | Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers |
| ASTM D7409 | ASTM | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
| ASTM D7419-07 | ASTM | Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection |
| ASTM D746 | ASTM | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D7771 | ASTM | Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black |
| ASTM D7823 | ASTM | Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry |
| ASTM D7836-13 | ASTM | Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials |
| ASTM D789 | ASTM | Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA) |
| ASTM D790 | ASTM | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D792 | ASTM | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D86 | ASTM | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
| ASTM D865 | ASTM | Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D882 | ASTM | Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
| ASTM D903 | ASTM | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D92 | ASTM | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| ASTM D93 | ASTM | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| ASTM D94 | ASTM | Standard Test Methods for Saponification Number of Petroleum Products |
| ASTM D974 | ASTM | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM E 1147 | ASTM | Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013) *Withdrawn, No Replacement |
| ASTM E1064 | ASTM | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM E1131 | ASTM | Standard Test Method for Compositional Analysis by Thermogravimetry |
| ASTM E1147 | ASTM | Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013) *Withdrawn, No Replacement |
| ASTM E1226 | ASTM | Standard Test Method for Explosibility of Dust Clouds |
| ASTM E1269 | ASTM | Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
| ASTM E1530 | ASTM | Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
| ASTM E1615 | ASTM | Standard Test Method for Iron in Trace Quantities Using the FerroZine Method |
| ASTM E1868 | ASTM | Standard Test Method for Loss-On-Drying by Thermogravimetry |
| ASTM E1899 | ASTM | Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM E1952 | ASTM | Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry |
| ASTM E202 | ASTM | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
| ASTM E2160 | ASTM | Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry |
| ASTM E2193 | ASTM | Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
| ASTM E222 | ASTM | Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
| ASTM E2313 | ASTM | Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
| ASTM E2409 | ASTM | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method) |
| ASTM E2469 | ASTM | Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
| ASTM E2550 -11 | ASTM | Standard Test Method for Thermal Stability by Thermogravimetry |
| ASTM E2716 | ASTM | Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry |
| ASTM E308 | ASTM | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E321 | ASTM | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM E398 | ASTM | Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
| ASTM E659 | ASTM | Standard Test Method for Autoignition Temperature of Chemicals |
| ASTM E681 | ASTM | Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
| ASTM E711 | ASTM | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
| ASTM E8 | ASTM | Standard Test Methods forTension Testing of Metallic Materials |
| ASTM E831 | ASTM | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM E84 | ASTM | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E86 | ASTM | Methods for Chemical Analysis of Antimony (Withdrawn 1983) *Withdrawn, No Replacement |
| ASTM E96 | ASTM | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM F1249 | ASTM | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM F1349-08 | ASTM | Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors |
| ASTM F1927 | ASTM | Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
| ASTM F1980 | ASTM | Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
| ASTM F2024 | ASTM | Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| ASTM F2214-02 | ASTM | Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| ASTM F2602-08 | ASTM | Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| ASTM F2902 | ASTM | Standard Guide for Assessment of Absorbable Polymeric Implants |
| ASTM F312 | ASTM | Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
| ASTM F88 | ASTM | Standard Test Method for Seal Strength of Flexible Barrier Materials |
